Services

General Fabrication & Services:

Al Rashed Engineering Fabrication Services provide servicing for oil & Gas and General Engineering Fabrications and specialized in fabrication services with experienced & reliable workforce.

The fabrication services include:

  • Casing head support units (CHSU)
  • Bit Breakers
  • Bit Ring Gauges
  • Pad Eyes
  • Pipe Racks
  • BOP Skids
  • Degasser Tanks
  • Perforation of Casings & Tubings
  • Drill Collar / Reamer stub Welding


Casing Head Support Unit(CHSU)

We fabricate all sizes of Casing Head Support Units as per customer requirements.

- 18-5/8” x 24 “ Casing Head

-24” x 30 “ Casing Head

Casing Head Support Unit
 

Bit Breaker

We fabricates Bit Breakers in sizes as

  • 3-7/8”
  • 5-7/8”
  • 6-1/8”
  • 8-3/8 – 8-5/8”
  • 10-5/8”
  • 12”-12-1/4”
  • 16”
  • 17”
  • 17-1/2
  • 22”
  • 28”
Bit Breaker
 

Pad Eyes

Al Rashed EFS fabricates all sizes and capacity of Pad Eyes according to customer’s requirements. Range of fabrication which includes 1T to 120T

Pad Eyes
 

Bit Ring Gauge

Al Rashed EFS fabricates all sizes of Bit Ring Gauge as below:

-5-7/8” to 34 “

API Ring gauge
 

Drill Collar / Reamer Stub Welding

This is a repair technique of lengthening Drill Collar or Reamer by Stub-Welding on the ends, often referred to as “stubbing” and this is done by arc welding process.

Performed by qualified personnel in accordance with qualified Welding Procedure Specification (WPS). All the Welds are stress relived through NC controlled electrical heating (Cooper Heat Treatment Machine). To ensure a successful stub welding, Brinell Hardness Test is carried out to meet the standard requirements in order to facilitate the weld material softness which is necessary for providing good resistance against fatigue cracking.

During Stub welding

After Stub welding

 

BOP Skids & Degasser Tanks

Al Rashed EFS fabricates Bop Skids, Degasser Tanks, Pipe Stands/Racks or any other fabrication works according to customer design & requirements. The fabricated structures are subjected to load tests and MPI inspection of weld joints and certified accordingly as per the requirement of its application.

We have been providing quality metal fabrication and welding services for which our fabrication shop is qualified for such welding process as Shield Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), Gas Tungsten Arc Welding (GTAW), Submerged Arc Welding (SAW), Oxy-acetylene cutting process.

The fabrication/welding shop is equipped with modern automatic SMAW welding machines, automatic profile cutting machines, etc. along with the conventional ones.

Bop Skid Fabrication

Degasser Tank Fabrication

 

Perforation of Casings & Tubings

Al Rashed EFS has a specially designed multi spindle drilling machine with twenty hydraulic spindles which can operate at the same time. Self-indexing & self-feeding are the special features of the machine. Once the pipe is loaded it can drill holes continuously on 2-7/8” to 7” OD pipes in random lengths with different hole patterns.

Automatic NC controlled Perforation
 

Bandsaw Cutting Facility

Al Rashed EFS is the only oil field servicing company in KSA to have in their ranks an automatic Bandsaw cutting facility upto a maximum diameter of 1.30 Meters.

Automatic Bandsaw (1.30Mtr. capacity)
   
 
Copyright © 2010 Al Rashed Engineering & Fabrication Services. All right reserved. Designed and Developed by GulfNet Solutions